Pressure Washer Recall: CPSC Flags a Shock Risk

Pressure Washer Recall: CPSC Flags a Shock Risk

On September 24, 2026, the U.S. Consumer Product Safety Commission issued a pressure washer recall warning for FOTING electric pressure washers because the units lack a ground-fault circuit interrupter and an adequate-length cord. The pressure washer recall matters before fall cleanup: homeowners should stop using a flagged tool, confirm the model, and hire a qualified pro when equipment safety is uncertain.

Key takeaways

  • CPSC posted the FOTING pressure washer safety warning on September 24, 2026.
  • The agency identified a missing GFCI and an inadequate power-cord length.
  • CPSC tells consumers to stop using the flagged pressure washers.
  • A homeowner can hire out driveway, siding, or deck cleaning when a tool fails a safety check.

CPSC identified two electrical safety problems

CPSC says the flagged FOTING pressure washers lack an integrated ground-fault circuit interrupter, commonly called a GFCI, near the plug. The agency also cites an inadequate power-cord length. CPSC says those conditions pose shock and electrocution hazards and tells consumers to unplug, cut the power cord, and dispose of the affected product. Do not use the warning as a diagnosis for every pressure washer. Check the model and the official notice before you act.

CPSC warning detail What the agency says Homeowner action
Warning date September 24, 2026 Check the official notice before cleanup
Electrical protection No integrated GFCI near the plug Stop using an affected unit
Power cord Inadequate length Avoid operating the affected unit
CPSC direction Unplug, cut cord, dispose Follow local disposal rules
Sep. 24
Warning date
2
Safety defects cited
1
Model check first
3
CPSC disposal steps
Bar chart showing the three CPSC-directed actions for affected FOTING pressure washers: unplug, cut the cord, and dispose of the unit.
CPSC directs owners of affected FOTING pressure washers to unplug, disable, and dispose of the unit.

A safety check comes before outdoor cleaning

Pressure washing puts electricity, water, hoses, and exterior surfaces in the same work area. Start by finding the brand and model label. Compare it with the notice, then stop if the product matches. Keep the tool out of service while you confirm the details. A repair shop, retailer, or manufacturer can help identify a product, but only the official notice tells you whether the unit falls within the warning.

Homeowners who need the work done can use our pressure washing cost guide to set a budget before seeking offers. Include the surface, access, water supply, and stains in the job description. Those details give a provider enough information to quote the work without guessing.

Local pros can make the safety decision clear

Trades pros build trust when they name the equipment they will use and explain the site setup. A pressure-washing quote can state whether the pro supplies the machine, how the crew protects outlets and landscaping, and where runoff will go. That scope helps a homeowner compare offers on the same work.

For any outdoor service, ask for proof of the provider’s identity, a clear task list, and payment terms before work begins. Our contractor-app guide explains how vetting and payment protection support that process.

Fall cleanup can wait for safe equipment

The CPSC warning covers FOTING pressure washers named in the agency notice. Identify the model, follow the notice if it matches, and use a qualified provider when you cannot confirm that the equipment is safe.

Homeowners: Post your outdoor cleanup job and compare offers from local pros.

Pros: Put the equipment, site protection, and cleanup plan in the quote before you start work.

Scroll to Top