Local service guide
Appliance Installation in Des Moines, IA
Arrange Appliance Installation in Des Moines by sending the installer your model number, photos of existing connections and a list of requested work before booking delivery. Get a written quote separating positioning, hookup, connection changes and removal. For plumbing or mechanical work, verify the contractor’s Iowa license and registration. If MidAmerican supplies your electricity, check appliance rebate and recycling eligibility before purchasing equipment or paying for haul-away. [1] [2] [3]
Define the installation before comparing quotes
Send the model number and manufacturer’s installation instructions with your request. Photograph the appliance opening, water shutoff, drain, outlet and other relevant connections. Measure the opening and delivery route, including doorways and stairs. Ask the provider to identify anything you need to resolve before arrival.
Request separate descriptions for delivery, removing packaging, positioning, leveling, hookup and testing. For a dishwasher or refrigerator, ask who supplies connection parts. For laundry equipment, ask who handles the dryer connection and vent work. Tell the provider about damaged connections and requested changes rather than describing the entire job as a replacement.
Confirm who handles unfinished work if the delivery crew cannot complete the installation. Coordinate the retailer’s delivery appointment with the installer’s visit, and agree on where the crew will leave the appliance if another provider needs to finish the job.
Verify credentials for plumbing and mechanical work
Iowa’s Department of Inspections, Appeals, and Licensing requires plumbing and mechanical contractors to hold a board license and register with DIAL. Its contractor-license page provides access to a public license-verification portal. Use that resource when your installation includes plumbing or mechanical-system work. [3]
Ask for the business name and contractor license number, then check that they match the company quoting the work. DIAL treats contractor registration and trade licensure as separate requirements. A registration number alone does not establish that the business holds the relevant plumbing or mechanical contractor license. [3]
Have the provider describe the trade work in writing and identify any subcontractor. Ask who will confirm permit requirements for your address and arrange any required inspection. Include that responsibility in the quote before accepting connection changes.
Compare the complete installation scope
Request an itemized quote for your appliance and existing connections. Ask providers to separate labor, supplied parts, connection changes and removal. Use quotes for the same scope when planning your budget; the available evidence does not establish a Des Moines installation-price range.
Agree on how the installer will handle an unexpected problem. Ask them to pause, explain the added work and obtain your approval before increasing the price. Include floor protection, packaging cleanup and operating checks in the scope. Confirm whom you should contact if you discover a connection problem after the visit.
Check the rebate before buying equipment
MidAmerican offers rebates for qualifying ENERGY STAR-certified clothes washers, electric clothes dryers, refrigerators and freezers. It must supply the equipment’s primary electricity. Refrigerators and freezers must hold at least 10 cubic feet; natural gas dryers do not qualify. [1]
For the 2026 program, you must purchase, install and operate eligible equipment between January 1 and December 31, 2026. Submit your application within 90 days of purchase or by December 31, 2026, whichever comes first. Save the itemized receipt or invoice and review MidAmerican’s qualifications before including a rebate in your budget. [1]
MidAmerican limits rebates to two for each piece of equipment per installation address and caps payments at 70 percent of equipment cost. It excludes labor from that cost. Ask the seller and installer to distinguish the equipment price from installation charges on your paperwork. [1]
Arrange removal alongside delivery
MidAmerican offers eligible Iowa and Illinois electric customers no-cost pickup and a $50 rebate for each qualifying refrigerator or freezer. It requires at least 10 cubic feet, excludes commercial sizes and requires the appliance to remain working, cooling and plugged in at pickup. MidAmerican must supply the equipment’s primary electricity. [2]
Check pickup availability before agreeing to retailer or installer haul-away. Ask the recycling provider how to coordinate the old appliance’s location with your new delivery while preserving its required plugged-in condition. If your appliance does not qualify, request a separate removal quote and confirm who will carry it out. [2]
MidAmerican’s 2026 qualifying appliance rebates
Local details that affect your job
Check your electricity supplier and year-end deadline
A Des Moines address alone does not establish eligibility for MidAmerican’s appliance rebates. Check your electricity bill: MidAmerican must provide the equipment’s primary electricity. For a late-2026 purchase, coordinate installation and paperwork with the December 31 application cutoff, even if fewer than 90 days have passed since purchase. [1]
Preserve the old appliance’s pickup eligibility
MidAmerican’s regional recycling program gives eligible Iowa electric customers a removal option to check before paying for haul-away. The refrigerator or freezer must remain working, cooling and plugged in at pickup. Confirm the pickup plan before asking your installer to disconnect or remove it. [2]
Check Iowa registration and trade licensure separately
For plumbing or mechanical work, use DIAL’s contractor-license page to reach its public verification portal. Iowa requires both contractor licensure and DIAL registration. Ask the quoting business for both credentials and identify the business that will perform any subcontracted trade work. [3]
Choose your next installation step
| Your situation | Next step | Confirm before booking |
|---|---|---|
| Replacement using existing connections | Send photos and request a defined hookup scope. | Parts, positioning, testing and removal responsibilities. |
| Plumbing or mechanical work | Verify the contractor’s Iowa license and DIAL registration. | Business name and credentials for the company performing the work. |
| Appliance purchase with MidAmerican electricity | Review the 2026 rebate qualifications. | Eligible model, itemized receipt and application deadline. |
| Working refrigerator or freezer removal | Check MidAmerican recycling eligibility before accepting haul-away. | Electricity eligibility, minimum size and plugged-in pickup condition. |
Your hiring checklist
- Send the model number, installation instructions and connection photos.
- Measure the appliance opening, doorways and delivery route.
- Ask the provider to identify connection changes and who will perform them.
- Request an itemized quote and agree on approval for added work.
- Coordinate delivery, installation and removal appointments.
- Review rebate qualifications before purchase and retain the itemized invoice.
- Agree on operating checks, cleanup and a contact for problems after installation.
Frequently Asked Questions
How much should I budget for installation?
Request an itemized quote for your appliance, connections and requested changes. The available evidence does not establish local installation prices. Compare labor, parts, connection changes and removal across quotes with the same scope.
How do I check a plumbing or mechanical contractor?
Ask for the business name and contractor license number, then use the public verification portal linked from DIAL’s contractor-license page. Iowa requires plumbing and mechanical contractors to hold a board license and DIAL registration. [3]
Does MidAmerican offer a gas dryer rebate?
MidAmerican excludes natural gas dryers from this appliance rebate program. It lists a $35 rebate for qualifying ENERGY STAR-certified electric clothes dryers when it provides the equipment’s primary electricity. [1]
Can MidAmerican collect a broken refrigerator?
This recycling program requires refrigerators and freezers to remain working, cooling and plugged in at pickup. It also requires at least 10 cubic feet and excludes commercial sizes. Arrange another removal option if your appliance does not qualify. [2]
Sources and scope
This guide combines the sources below with practical planning guidance. Figures apply to the stated geography and period; request a written quote for your property.