Local service guide
Tile setting in Charlottetown: hiring and preparation
Arrange Tile setting in Charlottetown by choosing an installer for your project, agreeing on surface preparation and getting a written scope before booking. Compare removal, materials, installation and disposal separately. Resolve suspected asbestos before demolition: PEI workplace rules require treating suspect material as asbestos-containing until a competent person determines otherwise. [1]
Choose an installer for the work you need
Describe whether you need a backsplash, floor, shower rebuild or repair. Send photographs and approximate dimensions, then request an inspection before accepting the final scope. For repairs, identify any spare matching tiles and ask the installer to assess the surrounding installation.
Request examples of comparable work and discuss the details you will see each day: exposed edges, corners, thresholds and cuts around fixtures. For a shower, ask the installer to name the waterproofing system and explain their proposed checks before covering it. Record who will coordinate the drain and any plumbing or electrical changes.
Request liability insurance documentation and written warranty terms. Establish who will perform and supervise the work. Ask how you should report a defect and who will handle any correction covered by the warranty.
Follow this preparation sequence before booking
1. Define the finished result. Record the room measurements, tile selection, pattern, grout colour and edge treatment. Agree who supplies the tile, checks quantities and handles shortages or damaged deliveries. Use this same brief for each quote.
2. Resolve suspect existing materials before removal. WCB PEI lists flooring, backing, mastics, adhesives and joint compound among possible asbestos-containing materials. Its workplace rules require a competent person to collect suspected-material samples and submit them to an accredited laboratory. Arrange assessment before the crew cuts, scrapes or removes suspect layers. [1]
3. Schedule specialist work if assessment confirms asbestos. PEI workplace regulations require a valid asbestos contractor’s certificate for asbestos work and written notification to the Director at least three business days before the planned work. Ask the specialist to establish the required approvals and completion arrangements before you confirm the installer’s start date. [1]
4. Approve the preparation scope. Have the installer explain how they will assess the exposed floor or wall and address damage. For conditions hidden until removal, agree on a price and written approval process. Identify who pays for testing or specialist work and who receives the records.
Complete the removal and access plan
5. Assign debris handling. Name the person who sorts, loads and transports the material, then confirm the destination and applicable fees. IWMC requires source separation at its drop-off centres. Its commercial rules allow businesses to hire a commercial hauler or transport sorted material themselves, and permit rejection of unsorted material. [2] [3]
6. Prepare the work area. Agree where the crew will cut tile and store materials. Plan protection along the route through your home, dust control and daily cleanup. Assign appliance, furniture and fixture handling, and arrange access around children or pets.
7. Agree on downtime and handover. Request a schedule covering removal through return to use. Obtain product-specific waiting instructions for walking on the floor, using the shower or operating proposed floor heating. Arrange another bathroom if yours will be unavailable. At handover, review edges and transitions, record unfinished items and collect care instructions.
Compare the full price and published disposal fees
Request separate amounts for demolition, surface preparation, tile supply, installation materials, setting, finishing and debris handling. Identify allowances, exclusions and taxes. Before accepting a quote, check that it covers the preparation sequence and records how you will approve additional work.
IWMC’s residential Waste Watch Drop-Off Centre schedule lists construction and demolition material at $136 per tonne with a $5 minimum, and mixed waste at $230 per tonne with a $50 minimum. Use these facility charges to discuss a disposal allowance. They do not establish the price of tile setting or transport. [2]
Confirm which customer schedule applies to a contractor’s load. IWMC publishes a separate commercial schedule and assigns mixed-waste surcharges to the contractor, hauler or customer transporting the material. Record responsibility for those charges and any rejected load in the quote. [2] [3]
Published residential drop-off disposal rates
Local details that affect your job
Use the Capital drop-off details for your hauling plan
IWMC lists the Capital Waste Watch Drop-Off Centre at 8 Superior Cres. in Charlottetown, telephone 902-892-1333. Customers must sort and unload their material, cover and secure transport loads, and finish unloading and depart before closing. Before choosing to haul debris yourself, confirm material acceptance and current hours, and allow time for unloading. [2]
Arrange a separate destination for asbestos waste
IWMC lists asbestos among special materials that may not be accepted at all facilities and require a Department of Environment permit. For confirmed asbestos work, ask the certified specialist to document the disposal destination and permit arrangements before removal. Do not assume the Capital centre accepts that load. [1] [2]
Choose your next step before accepting a quote
| Your situation | Next step | Record in the scope |
|---|---|---|
| Dry-area backsplash | Request a surface assessment and layout proposal. | Tile supply, preparation, exposed edges and cleanup. |
| Shower installation or rebuild | Discuss waterproofing, drain coordination and checks before covering. | Product names, responsibilities and return-to-use instructions. |
| Suspected asbestos in flooring or adhesive | Arrange competent-person assessment before disturbance under PEI workplace rules. | Testing responsibility and any certified asbestos contractor’s work. |
| You will haul ordinary demolition debris | Confirm acceptance and sorting with IWMC. | Destination, unloading plan and applicable disposal allowance. |
| The contractor will haul debris | Confirm the customer fee schedule and commercial sorting requirements. | Transport price, facility charges and surcharge responsibility. |
Your hiring checklist
- 1. Prepare one project brief with photographs, measurements, tile choice and finishing details.
- 2. Review comparable work, insurance documentation and warranty terms.
- 3. Resolve suspect flooring or adhesive before disturbance.
- 4. Agree on preparation costs and written approval for hidden damage.
- 5. Assign sorting, hauling, disposal fees and responsibility for rejected loads.
- 6. Prepare access, cutting space, protection and fixture handling.
- 7. Obtain return-to-use instructions and review outstanding work at handover.
Frequently Asked Questions
How much should I budget for tile installation?
Obtain an inspected quote for your room and chosen tile. Compare the same removal, preparation, materials and finishing scope across installers. Ask for separate hauling and disposal amounts. IWMC’s published facility fees provide a reference for debris costs, but they do not provide an installation price. [2]
Can I remove the existing flooring myself?
Resolve suspected asbestos before disturbing flooring or adhesive. WCB PEI identifies flooring, backing and mastics as possible asbestos-containing materials and sets competent-person sampling requirements for workplaces. After assessment, ask the installer which preparation tasks you can undertake and what condition they expect at arrival. [1]
Can I take asbestos debris to the Capital centre?
Confirm the destination through the asbestos specialist and IWMC before transport. IWMC states that asbestos may not be accepted at all facilities and requires a Department of Environment permit. Have the specialist include the destination and documentation in their scope. [2]
What should I keep after the installer finishes?
Keep the approved scope, invoices, warranty terms, care instructions and any assessment records. Record the tile details, grout colour and installation product names. Walk through the room with the installer and agree on how and when they will address outstanding items.
Sources and scope
This guide combines the sources below with practical planning guidance. Figures apply to the stated geography and period; request a written quote for your property.